How to reset Brother DCP 195C printer



Does your Brother DCP model printer display an error like this?
clean unable 46
unable to print clean pad is full

Here is the proper reset code sequence to reset DCP printers without numeric keypad:

This instruction is also applicable to printer model: Brother DCP 110C, 115C, 120C, 130C, 135C, 145C, 150C, 165C, 185C

1. Press the Menu, then Mono Start key then press the UP arrow key 4 times to make the machine enter the maintenance mode and "ERROR 46" pops-up in the display.

2. Enter maintenance mode 80: Select 8 by pressing the UP/DOWN arrow key and push OK key and select 0 and push OK key

3. Now Press MONO arrow key several times until you see PURGE:XXXXX

4. Select 2 and push OK, Select 7 and push OK, 8 and push OK, select 3 and push OK and the purge counter is now reset to 00000.

5. Press STOP/EXIT key to go to root of maintenance mode

6. Enter code 99 to exit maintenance mode: Select 9 and push OK, Select 9 and push OK.

29 comments:

  1. thank you :) it works :)

    ReplyDelete
  2. thnx a lot....good jod

    ReplyDelete
  3. tnx a lot...it really works..;))

    ReplyDelete
  4. help me..my problem cannot solve..i'm very sad :(

    ReplyDelete
  5. thank you so much for this instruction..i can try

    ReplyDelete
  6. thank you.. it works :)

    ReplyDelete
  7. thanks brooooo... it realy works

    ReplyDelete
  8. yellow colour is not printing

    ReplyDelete
  9. thanks bro it work on my on my dcp-195c
    i just unplugged the power cable then upon plugged the power cable i press the menu to access the " machine error 46" then i follow the step #2 thanks alot

    ReplyDelete
  10. sir my printer is not work properly after clean paper jam it show error (Print unable 32)

    ReplyDelete
  11. sir my printer dcp 195c have an error of init unable 50, i already clean the paper jam but still its still give an init unable 50 error...please help man...most appreciated...thanks in advance.

    ReplyDelete
  12. sir..kindly help me, my printer dcp 195c have an error of init unable 50, i already clean the paper jam but still there is an error that insist, i cant use the printer..i need your help now...thanks in advance..

    ReplyDelete
  13. thank you... it works!! =)

    ReplyDelete
  14. Thank you Sir It works 100% properly...

    ReplyDelete
  15. THANKS A LOT . iT WORKS

    ReplyDelete
  16. can u give me the service repaire of dcp-195c

    ReplyDelete
  17. my dcp 195c shows "cannot detect black ink",any ways to stop this message?helpppppsss~~

    ReplyDelete
  18. my dcp 195c cannot print using black ink although the cartridge can be detected and is full. help me. thn

    ReplyDelete
  19. sir i already use the reset setting of init unable 46 but after that, another alarm print unable 73 pls help my dcp 195c

    ReplyDelete
  20. Also works with DCP-J315W :D
    Thanks!

    ReplyDelete
  21. sir my printer can copy black, but cannot print a document in black, can u help me please, thanks in advance!

    ReplyDelete
  22. salamat po ng marami.

    ReplyDelete
  23. Also works with DCP-385c

    ReplyDelete
  24. pls. help, i already installed black ink , still the message is "install black

    ReplyDelete
  25. need reset counter on dcp-197c can you help me thanx

    ReplyDelete
  26. work in a brother dcp350c

    ReplyDelete
  27. thank you..say cheese

    ReplyDelete