How to reset Canon Pixma IP2770

Canon PIXMA iP2770 are classified into photo printers. This printer is very suitable for use at home. Results in getting the equivalent of lab quality photos. The speed  of this printer quickly spelled out that is about 7 ipm for mono and the 4.8 ipm for color and for 4R-sized photo takes 55 seconds. Resolution of Canon PIXMA iP2770 printer at 4800 x 1200dpi (max). Still uses USB 2.0 connectivity and the type cartridge using PG-810, CL-811 (PG-810XL, CL811XL Optional). For this printer weight of 3.4 kg with dimensions of 445 X 250 X 130mm.

If a lights blink on the POWER and RESUME button alternately and it will show an error 5B00. It means that your ink absorber inside the printer is almost full. In order to solve this you need to clear or reset the counter protection of your printer. To do this, follow this steps.

First make sure that the power cable and usb cable are connected, before you perform the reset procedure. And download the resetter at the bottom of this post.

FIRST STEPS:  Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter

1. After you download the resetter, extract it and double click "servicetool.exe"
2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!
Warning: Getting rid of the error message won’t change that you might end up with ink leaking out of the printer if you don’t either replace or clean the ink wastepad.
This is a new Service Tool
Please leave a comment, if its working

90 comments:

  1. AnonymousDecember 13, 2010 at 12:26 PM

    thank

    ReplyDelete
  2. AnonymousDecember 21, 2010 at 10:01 PM

    muy buena la solucion, me sirvio de mucho.

    Gracias...

    ReplyDelete
  3. AnonymousJanuary 2, 2011 at 4:22 PM

    thank you! your resetter is working good.

    ReplyDelete
  4. yohartJanuary 25, 2011 at 2:46 PM

    it's not work...., is this disposible resetter...? just use for one printer in one computer ?

    ReplyDelete
  5. SteveJanuary 29, 2011 at 9:10 PM

    thanks pal. this works for me!

    ReplyDelete
  6. AnonymousFebruary 15, 2011 at 9:52 PM

    orange button blinking 15x, this procedure didn't work. can anybody help me please...

    ReplyDelete
  7. AnonymousFebruary 16, 2011 at 2:53 PM

    how to make this work? I practically am clueless...

    ReplyDelete
  8. AnonymousFebruary 19, 2011 at 11:13 AM

    Thanks! This really works!

    ReplyDelete
  9. jupiterFebruary 25, 2011 at 12:06 AM

    Its really works !!!

    ReplyDelete
  10. AnonymousMarch 2, 2011 at 9:14 AM

    im still having error... both ink colors won't reset... any help?

    ReplyDelete
  11. AnonymousMarch 8, 2011 at 6:26 PM

    error code 006.. nothing works

    ReplyDelete
  12. AnonymousMarch 8, 2011 at 11:29 PM

    says that function done but still ink counter not resetted. still low ink

    ReplyDelete
  13. Claire BacangMarch 29, 2011 at 5:51 PM

    hallelujah!!! it works just like magic!!! thnx

    ReplyDelete
  14. AnonymousApril 1, 2011 at 1:09 AM

    Thank you so much, no need to transport my printer in malls just to reset, this is surely big help to others, because it's very simple and easy instructions.

    low ink just press 5 seconds the resume button and it automatically will continue to print

    ReplyDelete
  15. AnonymousApril 5, 2011 at 11:50 AM

    Thank its work ^_^

    ReplyDelete
  16. AnonymousApril 9, 2011 at 3:15 PM

    i'll try this. tnx

    ReplyDelete
  17. AnonymousApril 25, 2011 at 10:32 PM

    thank you

    ReplyDelete
  18. AnonymousMay 3, 2011 at 10:57 AM

    thank you so much...much,....much

    ReplyDelete
  19. AnonymousMay 15, 2011 at 12:37 AM

    Thank you... makes a lot of try just give a little patient and it works..

    ReplyDelete
  20. AnonymousMay 16, 2011 at 3:10 PM

    first step worked for me... tnx...

    ReplyDelete
  21. AnonymousMay 26, 2011 at 3:47 PM

    thank you... its working

    ReplyDelete
  22. AnonymousJune 7, 2011 at 11:50 AM

    tnx alot

    ReplyDelete
  23. AnonymousJune 9, 2011 at 10:02 AM

    i dont have the resetter. anybody please help

    ReplyDelete
  24. AnonymousJune 9, 2011 at 11:59 AM

    ummmm, can't see the download link for the resetter

    ReplyDelete
  25. rolando baesJune 11, 2011 at 1:32 PM

    Thank you very much for sharing. The steps and the software works.

    ReplyDelete
  26. AnonymousJune 14, 2011 at 10:27 PM

    i was able to reset. but my ink levels still show empty. why?

    ReplyDelete
  27. sssJune 18, 2011 at 7:13 PM

    It's work very well for me. Just follow the procedure correctly.

    ReplyDelete
  28. ayhacahayaJune 25, 2011 at 4:53 PM

    thx for your info :)

    ReplyDelete
  29. AnonymousJuly 20, 2011 at 2:55 AM

    oh my! thanks..! my printer is now working.. but my ink level said that it is already running out.. is that normal?

    anyway, again.. thank you!
    i've been fixing it for a couple of hours and then i found this site. XD

    ReplyDelete
  30. ishpalAugust 5, 2011 at 8:05 PM

    my printer is having error 6000 how to solve it

    ReplyDelete
  31. NoobAugust 6, 2011 at 8:13 AM

    This comment has been removed by the author.

    ReplyDelete
  32. NoobAugust 6, 2011 at 8:14 AM

    @ishpal chech this link http://pcmedikls.blogspot.com/2010/11/canon-pixma-error-codes-and-solution.html

    ReplyDelete
  33. AnonymousAugust 6, 2011 at 8:21 PM

    i also thankful for this tutorial bcoz it also help me to knw how to make manual resett a canon ip2770 printer.

    ReplyDelete
  34. AnonymousAugust 19, 2011 at 8:17 AM

    how to solve error 6000 for ip2770? pls help...

    ReplyDelete
  35. AnonymousAugust 29, 2011 at 6:01 PM

    will it take 30 minutes when resetting a printer with ERROR 5B00???

    ReplyDelete
  36. AnonymousSeptember 2, 2011 at 11:54 AM

    I have Pixma 2770 blinking 5 orange... help

    ReplyDelete
  37. AnonymousSeptember 5, 2011 at 2:31 AM

    thank.... its 70% working...

    plese update resetter ink pad ...~

    ReplyDelete
  38. AnonymousSeptember 21, 2011 at 9:39 PM

    my printer is not working

    ReplyDelete
  39. AnonymousSeptember 21, 2011 at 9:41 PM

    still not working...i've tried 5 times still error 006 appeared

    ReplyDelete
  40. AnonymousSeptember 22, 2011 at 1:36 PM

    wow!!!!amzing!!!!it really works.....thank you very much.......yepeyyy.....

    ReplyDelete
  41. AnonymousOctober 15, 2011 at 10:26 PM

    ok Thanks Its work..thank you

    ReplyDelete
  42. AnonymousOctober 20, 2011 at 9:57 AM

    me, still not working, it appeared the error 006..
    what will i do?..please help me

    ReplyDelete
  43. AnonymousOctober 25, 2011 at 11:58 AM

    it works! thank you very much...... keep up the good and free software........

    ReplyDelete
  44. AnonymousNovember 7, 2011 at 9:15 PM

    diko pa nasubukan..try ko muna ha...salamat

    ReplyDelete
  45. AnonymousNovember 11, 2011 at 10:40 AM

    it's not working for me.. it keeps on saying Error! (error code: 006).. what does it mean?? please reply..

    ReplyDelete
  46. AnonymousNovember 18, 2011 at 12:17 AM

    thanks gumana na sa printer namin nice GODbless =)

    ReplyDelete
  47. AnonymousNovember 26, 2011 at 2:43 PM

    THANK YOU!!! IT WORKS NOW!!! :)

    ReplyDelete
  48. AnonymousNovember 28, 2011 at 3:01 PM

    thankz

    ReplyDelete
  49. AnonymousDecember 2, 2011 at 5:24 PM

    thanks

    ReplyDelete
  50. tisaDecember 16, 2011 at 12:57 PM

    thankyou :)

    ReplyDelete
  51. AnonymousDecember 20, 2011 at 5:15 PM

    thank u

    ReplyDelete
  52. AnonymousDecember 20, 2011 at 5:18 PM

    salamat

    ReplyDelete
  53. AnonymousJanuary 13, 2012 at 1:54 PM

    thanks! canon is awesome!

    ReplyDelete
  54. omerson, PHJanuary 16, 2012 at 12:36 PM

    wow thanks It's working fine for me, Just strictly follow inst. :-D

    ReplyDelete
  55. AnonymousJanuary 17, 2012 at 5:31 PM

    It's Work Thank You


    Sar Computer

    www.sarcomputer.net

    ReplyDelete
  56. AnonymousFebruary 6, 2012 at 11:02 PM

    tnx, do you have a resetter for canon IP 4970?

    ReplyDelete
  57. AnonymousFebruary 9, 2012 at 7:03 PM

    thanks.. it works!!

    ReplyDelete
  58. KAILLEZFebruary 10, 2012 at 10:59 AM

    IT WORKS ON MY PRINTER.. THANKZ ALOT

    ReplyDelete
  59. AnonymousFebruary 15, 2012 at 11:55 PM

    thanks

    ReplyDelete
  60. AnonymousFebruary 16, 2012 at 1:52 PM

    YOU'RE A LIFE SAFER!!!

    ReplyDelete
  61. AnonymousFebruary 21, 2012 at 8:20 AM

    anybody does have the waste ink pad resetter for canon pixma 4970? thnx

    ReplyDelete
  62. AnonymousFebruary 23, 2012 at 1:43 PM

    thank you very much,, my printer is working pretty good now,, thanks for your helpful tips,,

    ReplyDelete
  63. AdrianChrossFebruary 29, 2012 at 7:01 PM

    i tried to go to service mode but when i press the resume button five times the resume button becomes solid orange then nothing happens

    ReplyDelete
  64. zyrusMarch 10, 2012 at 10:12 AM

    dud ilov u and tnx

    ReplyDelete
  65. zyrusMarch 10, 2012 at 10:13 AM

    dud tnx ilov u it work

    ReplyDelete
  66. AnonymousMarch 10, 2012 at 2:29 PM

    its not working with me, error 006 still appearing,. can anyone know how to fix this error?

    ReplyDelete
  67. ligaw.....March 11, 2012 at 12:24 PM

    what will i do if theres an error 006

    ReplyDelete
  68. AnonymousMarch 15, 2012 at 4:12 PM

    what will i do if theres an error 006

    what will i do if theres an error 006
    what will i do if theres an error 006

    ReplyDelete
  69. sallyMarch 15, 2012 at 4:13 PM

    what will i do if theres an error 006
    what will i do if theres an error 006

    ReplyDelete
  70. sallyMarch 15, 2012 at 4:14 PM

    what will i do if theres an error 006

    ReplyDelete
  71. AnonymousMarch 24, 2012 at 12:37 AM

    solution for error 006:
    follow the steps above.
    in the "SET DESTINATION, REGION:", change "JPN" to "ASA".
    then follow the steps written above.
    then you're done!

    ReplyDelete
  72. TJMarch 27, 2012 at 6:59 PM

    Thank you so much! IT WORKED! THANK YOU!

    ReplyDelete
  73. AnonymousApril 4, 2012 at 11:37 AM

    wow working ..nice one

    ReplyDelete
  74. AnonymousApril 7, 2012 at 3:39 AM

    not responding why?

    ReplyDelete
  75. AnonymousApril 25, 2012 at 4:20 PM

    the resetter tools not responding when i click 'main' .. why ? any solution master ? i use windows 7 ultimate32bit, does the resetter support ?

    ReplyDelete
  76. nashMay 14, 2012 at 12:07 PM

    Thanks! It worked! ^_^

    ReplyDelete
  77. TJJune 4, 2012 at 11:16 AM

    thank you so much! it really helps! thanks! :)))))))

    ReplyDelete
  78. AnonymousJune 26, 2012 at 3:47 PM

    two thumbs up!

    ReplyDelete
  79. christineJuly 2, 2012 at 8:10 AM

    hi! can anyone help me? when i use the resetter it freezes everytime I click MAIN. i followed everything.

    ReplyDelete
  80. AnonymousJuly 9, 2012 at 10:06 AM

    thank you!!.. i just press the "RESUME" button and it WORKS!!

    ReplyDelete
  81. AnonymousJuly 9, 2012 at 10:07 AM

    thank you so much!!.. i just press the "RESUME" button and it WORKS!!

    ReplyDelete
  82. AnonymousJuly 9, 2012 at 11:35 AM

    grabe solve aq problem salamat au

    ReplyDelete
  83. kirkJuly 9, 2012 at 3:18 PM

    tnx dude it helps me a lot tnx so much

    ReplyDelete
  84. kirkJuly 9, 2012 at 3:19 PM

    thank u so much

    ReplyDelete
  85. japzzJuly 19, 2012 at 5:46 PM

    nice it's a great to download this resetter......

    ReplyDelete
  86. RandyAugust 1, 2012 at 7:26 PM

    Guyz ... can u give me the Driver of ip2770.. cause my printer need a driver.

    ReplyDelete
  87. AnonymousAugust 2, 2012 at 6:41 PM

    gracias
    thank you
    salamat

    ReplyDelete
  88. printer tech..August 19, 2012 at 2:04 PM

    bkit not working?bkit hindi ko mareset lahat ng canon model na labas ngaung year na to(2012)not responding ang resetter,..ung last year na labas na same model narereset nmn ng mga resetter..pls help...tnx

    ReplyDelete
  89. printer tech..August 19, 2012 at 2:16 PM

    pls....help

    ReplyDelete
  90. AnonymousAugust 25, 2012 at 6:29 PM

    sa ip2770 ko di ring nawork. nagloading siya ng matagal pagpinindot ko ung main.error 5B00 din sa akin. tinary ko sa windows 7 at windows xp pareho lang ang nangyayari. if you know how to fix this pls i beg you tell u naman. ito email ko sa fb at yahoo mail j.eric_abelardo@yahoo.com tnx

    ReplyDelete